Table of contents
Share Post
Ready to sley!

Ready to sley!

(So, the title doesn’t really work – noun, verb problem. But, sometimes inspiration is an illusive, little, b-!) Next up in the coverlet project, let’s sley the reed! The yarn has been measured on the warping board and has been twisted off. Next step, insert the lease sticks!

In go the lease sticks

In go the lease sticks

Lease sticks are 2 sticks with holes in the ends. Their purpose is to slide through the cross and keep all the yarns in order. In this case, I have a whole lot of the same color! So, it’s not quite as critical. But, they are still very important when keeping everyone in line! The goal is to avoid unnecessary twists and knots down the road!

Each yarn goes into a slot

Each yarn goes into a slot

Next up, the yarn goes into the reed! The reed I’m using is a 36″ wide (so it fits in the loom), with 12 dents per inch (12 slots or spaces per inch). Because I have a finer yarn, the yarns share a dent, so I end up with 20 yarns in 1 inch. Project is 18″, thus there is a total of 360 yarns! Math… lots of math!

Close-up!

Close-up!

Knotting each group

Knotting each group

I like to knot each inch in an effort to double check my counting. It’s saved me more than once!

Almost done!

Almost done!

Because the project doesn’t take up the entire reed, I like to start in the middle to be sure everything is centered! Next up, the reed will go into the loom! There will be more color soon, I promise! Until next time…

Ready to go in the loom

Ready to go in the loom

Weekly Weaving Newsletter

The absolutely best thing you can do to help with your weaving journey is to sign up for the Weekly Weaving Newsletter! This online Wednesday publication will keep you posted on that week’s FREE weaving educational content, plus I always toss in a story from me! It’s equal parts education and entertainment, all wrapped up in a short, few-minute read!

Related Articles