Table of contents
Share Post

You know, thinking up a title for a weekly blog – not so easy! And sometimes, just sometimes, all I can come up with is something sounding ridiculously corny. But, I’m guessing if you’ve read this far, you are OK with a little corn and we can all simply carry on, ignoring the crazy title! And here goes! (p.s. I am up for suggestions, if a brilliant title for a weaving blog comes to you in the middle of the night… just saying!)

And here are the players for today's sleying!

And here are the players for today’s sleying!

Today is sley-the-reed day!!!! Best day ever! I love this part of the process. I’m not sure exactly what makes it so appealing. All I can figure is that sitting at a table organizing hundreds of yarns just does it for me! I like to tell folks that to be a weaver, you have to be a little bit crazy… and I would guess my prior statement puts me firmly in that category! And I’m OK with that!

Lease sticks slide in.

Lease sticks slide in.

To sley a reed, you need a reed (rectangular frame with evenly spaced slots that will fit into your loom), lease sticks (a pair of sticks with holes in both ends meant to be a place holder for the cross that delineates the order of the yarns), and a pair of scissors. That is the bare minimum. But, for me, I always include a cup of tea, my project journal to track my time, and either a TV show or a little music to entertain me!

The view from where I'm sitting (aka, the view from my belly button!).

The view from where I’m sitting (aka, the view from my belly button!).

First up, the lease sticks slip through the cross I made on the warping board. I tied everything in strategic spots so I could locate the cross once I was sitting at the table. (Those ties get cut once I start sleying.) So now, the lease sticks are keeping the yarns in order! The reed sits directly in front of me with an edge hanging off the table to make the threading easier. The trick is to avoid knocking the reed over onto the floor. You can always tape it down if it makes you more comfortable!

Each yarn is placed in a dent of the reed.

Each yarn is placed in a dent of the reed.

Lots of little ends in this project!

Lots of little ends in this project!

Because I had a lot of color changes at the warping board, I have a lot of little ends that typically pull right off before the yarn goes into the reed. (I thought this particular pile was very pretty! And sometimes, that’s all you need for a bit of happiness – a pretty pile!)

Just, yum...

Just, yum…

I made it to the other end!

I made it to the other end!

I like to knot the yarns every inch or so just to double check my math. Like most folks, I don’t enjoy the process of undoing and fixing a project. So, I try to put as many checks and balances in place as possible along the way!

Ready to go to the loom!

Ready to go to the loom!

Next up, I’ll reunite the reed and the loom, bringing it all together! It’s going to be good! Talk to you soon…

Run 14 Sleying 8

Weekly Weaving Newsletter

The absolutely best thing you can do to help with your weaving journey is to sign up for the Weekly Weaving Newsletter! This online Wednesday publication will keep you posted on that week’s FREE weaving educational content, plus I always toss in a story from me! It’s equal parts education and entertainment, all wrapped up in a short, few-minute read!

Related Articles